Mašīna Golf 4 2002 1,9 TDI PD Triptronik Automāts ASZ
VAG COMs met visu laiku šādu kļūdu, nevar nodzēst. Tā ir vienīgā kļūda.
Viss itkā strādā ok.
Engine
18263- Powertrain Data Bus
P1855-35-10-Software version monitoring- intermittent
18263-Powertrain Data Bus
Forum rules
Uzsākot jaunu tēmu:
1. Precīzi nodefinē tēmas nosaukumu. Kurai markai, kas nedarbojas un kas notika. Piemēram, ja tev ir pazudis apgaismojums instrumentu panelī, tad nosaukums sastāvēs no vw markas un sērijas "Golf Mk2", tālāk - kādam priekšmetam/kurā vietā un kāda problēma. Tātad nosaukums būs "Golf Mk2 instrumentu panelim pazuda apgaismojums". Nevis "instrumentu panelis".
2. Lai iegūtu konstruktīvu atbildi - ir jābūt konstruktīvam problēmas raksturojumam/aprakstam. Konstruktīvam, nevis referāta formas atstāstam.
Uzsākot jaunu tēmu:
1. Precīzi nodefinē tēmas nosaukumu. Kurai markai, kas nedarbojas un kas notika. Piemēram, ja tev ir pazudis apgaismojums instrumentu panelī, tad nosaukums sastāvēs no vw markas un sērijas "Golf Mk2", tālāk - kādam priekšmetam/kurā vietā un kāda problēma. Tātad nosaukums būs "Golf Mk2 instrumentu panelim pazuda apgaismojums". Nevis "instrumentu panelis".
2. Lai iegūtu konstruktīvu atbildi - ir jābūt konstruktīvam problēmas raksturojumam/aprakstam. Konstruktīvam, nevis referāta formas atstāstam.
Re: 18263-Powertrain Data Bus
Nonācu pie slēdziena šodien. Nav tur orģinālais radio, bet interesanti ka tā kļūda nāk no Engine 
I'm guessing, but maybe this will help...
The Bentley Manual's general recommendation for can-bus (data-bus) errors is to:
(1) check all of the computer modules for error codes: engine, transmission, instruments, convenience, radio, immobilizer, etc., and fix them, and
(2) check the can-bus wiring for damage or loose connections
More specifically, this error may be related to the radio/navigation swap. The instrument cluster module (ICM), convenience control module (CCM), or immobilizer (typically part of the CCM), may need to be "adapted" to the new navigation system -- it is expecting to "see" the old radio & is complaining that the radio is not there. The error message is forwarded to everything else on the can-bus network, so the ECM logs the error even though it isn't an engine-specific problem.
Try scanning all the other modules for error codes & see what comes up.
Good Luck!
I'm guessing, but maybe this will help...
The Bentley Manual's general recommendation for can-bus (data-bus) errors is to:
(1) check all of the computer modules for error codes: engine, transmission, instruments, convenience, radio, immobilizer, etc., and fix them, and
(2) check the can-bus wiring for damage or loose connections
More specifically, this error may be related to the radio/navigation swap. The instrument cluster module (ICM), convenience control module (CCM), or immobilizer (typically part of the CCM), may need to be "adapted" to the new navigation system -- it is expecting to "see" the old radio & is complaining that the radio is not there. The error message is forwarded to everything else on the can-bus network, so the ECM logs the error even though it isn't an engine-specific problem.
Try scanning all the other modules for error codes & see what comes up.
Good Luck!
Nabadzības tarkšķis
Who is online
Users browsing this forum: No registered users and 5 guests